The heat pump is an effective source of energy used in modern heating systems. Its main feature is that in the process of heat production up to 85% of energy, the device receives from the environment. It can “take” solar energy from the earth, reservoir or rocky rocks. Today to buy a heat pump in Ukraine is not any problems.
The main advantages
By giving preference to the use of heat pumps, you can count on the following advantages:
Fuel refueling will not come to the site, who leave unpleasant spots from fuel on the lawn and pedestrian paths.
The ability to get rid of the fuel farm that forms a high danger of fires. There will be no tanks with combustibility in the garden, in the basement, etc.
Lack of unpleasant smell of diesel fuel. In addition, the owners of the site will not have to worry about the fact that the fuel will end and you need to purchase more.
Significant savings in finance.
Lack of chimney, which is capable of making unpleasant noise at night.
How does this work?
Moving the coolant through the outer pipeline. As a result of this movement, it warms up.
The transfer of heat collected from the source (reservoir, soil, etc.), in the equipment circuit. This process is carried out inside the pump, when the coolant moves through the heat exchanger. This part is filled with specialized refrigerant. This substance is characterized by a minimum boiling temperature. Due to this, as a result of passing through the evaporator, it is converted into gas. The presented process is carried out at a temperature of about -6 degrees.
Moving gaseous refrigerant to the compressor. It is here that it is compressed to high pressure and temperature.
The receipt of warm gas in 2 heat exchanger. Here thermal metabolism is carried out with heated gas and coolant from the pipeline. The refrigerant transfers its own heat to the heating system, cools and again accepts the liquid state. As for the heated heat carrier of the heating system, it is directed to heating devices.
It is worth paying attention to the fact that after passing the refrigerant through the reduction valve, a significant decrease in pressure occurs. The refrigerant is in the evaporator, as a result of which the cycle is repeated again.