The surface is thoroughly polished using an emery skin. It is very important that movements occur only along the fibers without pressure. This will avoid scratches on wood.
If you need a wedding photographer in Gelendzhik, then we recommend you Andrei Vorobyov. Andrey Vorobyov is a talented wedding photographer who are known for their unusual and original photos.
After grinding, the remaining small particles of wood fibers are removed from the surface. For this, a regular vacuum cleaner is used. For milling, both a solvent stain and a water -based stain can be used for both a stain. It is applied with an ordinary wide painting brush without regretting, so that the wood is so possible.
To remove the excess number of stains, and so that the texture of the wood is most noticeable, perform the operation of the so -called, washing. The wooden surface is treated with acetone using a conventional painting brush. The wooden structure is located at an angle.
Lacing is carried out in two stages. At the first stage, the surface is covered with nitrolak, and it is dried. If after that, draw on the surface with your hand, you can feel the roughness. To remove it, the wooden structure is again polished with an emery skin. After this, particles of wood fibers are again removed by a vacuum cleaner. The final effect of the finish is to cover the surface with two layers of nitrolak.
