Which of us, engaged in repair, did not encounter the problem of aligning the walls? Since the walls can be laid out of stone, brick, wood or reinforced concrete slabs, they need to be aligned before finishing will be completed. The surface of the walls should be close to ideal, since the walls are one of the largest and most noticeable surfaces in the room.
To level the irregularities and defects of the walls, three methods are most often used: the use of drywall, the use of wall panels, as well as plastering walls. One of the convenient ways in our time is the use of drywall.
Description of the article:
• You can easily perform a wide variety of designs from it, in addition, it is easily painted and it is easy to stick something on it.
• simply fix it on the wall, regardless of its irregularities and roughnesses.
• This is environmentally friendly material.
Drywall – the material is unusually popular among designers, because with its help, you can create the most intricate interiors.
Another way to align the walls is plastering. Use this method before staining walls or gluing wallpaper.
Choose a solution
First, a solution is selected, which will be plastered, then the walls from dust and dirt are cleaned. The following works are subsequently performed:
• Spray. The prepared solution is sprayed using a special spatula. The solution is pounced on the wall so that all defects can be hidden, and the recesses and cracks should be well filled with the solution. The thickness of the layer should be no more than 9 mm for brick walls and no more than 5 mm for walls of concrete or stone. So that the compatibility between the layers is good, the solution does not need to be leveled.
Apply a primer
• Next, apply a primer layer. For this, a thicker solution is prepared than for spraying. Apply as many layers of this solution to the surface of the wall as you need to final alignment.
• After that, it is necessary to perform the final stage of plastering. In this stage, the use of the covering layer is included, which should be applied to the still not dried layer of primer.
• After plastering the wall, it is necessary to moisten with water and grout.
When using wall panels, thoroughly aligning the walls is not required. However, the walls will look beautiful and stylish. Such panels can be made from traffic jams, natural wood, fiberboard, PVC, chipboard; Moreover, they are, leaf, rack, etc. There is a wide variety of all kinds of colors and textures.
In order to fix such panels on the wall, a special crate is first performed, with which these panels are attached to the wall. In fact, wall panels are final wall decoration.