Periodically the need for repairing small problems arises, eliminating serious breakdowns of a recently purchased door box. A high frequency of use of doors gives rise to many problems, and violation of the technology of manufacturing the structure and low -quality source materials become the cause of the rapid appearance of operational difficulties. The ease of the process of repair work allows the door owner to independently fix the damaged wooden block. Common problems that cause rattles of the doorbell, as well as shaking the door frame, are eliminated by the minimum number of tools and materials.
Correction of a wooden box
First, it is recommended to tighten the connecting screws, replace obsolete fixing elements with new. If the construction of the box was initially fixed with nails, it is allowed to use additional screws. The brick base requires the screws to add additional fixers. If the door structure is attached to the partition, holes are made in the vertical beam. Then, without removing the box from the door leaf, a hole is formed through it in the rack, the diameter of which is less than such a characteristic of a screw used to reliable fixation of the door. After fixing the structure of the screws, the screws are put up, and the door will become an aesthetically attractive product.
Correction of the rattle of a wooden box
The named defect is eliminated by the movement of the plate of the lock placed on the stop of the door structure. Then the screws are displayed with a screwdriver, the socket expands the nest at the door stop. At the end of the creation of new holes, a loop card is fixed, obsolete holes after expansion are recorded by traffic jams.
Correction of hinged loops of a wooden box
Steppery of screws of door loops causes poor closing the canvas, so it is recommended to tighten the weakened fasteners. The lack of the result of the named operation requires the use of long screws with the same diameter. If the necessary target remains unattainable, the old holes are expanded, closed by traffic jams by means of an adhesive mixture. Then new holes are made in which the loops are firmly fixed on the box. Problems arise in the presence of small or too deep holes for loops. The first case requires refinement of the holes to the desired dimensions by removing the door leaf, inserting the cardboard part of the necessary dimensions into the hole designed to install the loop. At the end of the process, loops are screwed, the door is hung in place.
Rules and requirements of high -quality sealing of the door box defects
All traffic jams and strips used in repair work must be glued.
High -quality cork wood should be devoid of defects.
The wood of the wood should correspond to the material of the components of the wooden door. Traffic jams are mounted on a flush with the level of the surface being repaired.
The end of the rearmament process should not leave gaps and cracks. The fibers of the wood material of traffic jams and strips are directed to the side, identical to the direction of the fibers of the repaired parts.
If the number of traffic jams observed on one meter of the door box is more than four copies, the damaged part is replaced by a new.
In places of repair work, the surface is thoroughly wiped with an emery skin until a smooth surface is formed, invisible against the general background of the structure. Then the processed surface is painted with compounds, the color of which is combined with the general design of the door.
Packed by the composition intended exclusively for wood materials, the joints are wiped with emery for the formation of a smooth surface.
Frivolous scratches and defects of the door leaf box are put down and treated with sandpaper.
Screws of loops periodically pull up.
The operation of the doors requires a check of the structure of the structure, the elimination of the detected defects. Time and improper use of doors inevitably bring the time of starting repair work. The hard process of eliminating the defects of the door frame through tools and materials can personally be carried out by the professional knowledge of professional knowledge of the design. With your own hand, repairs will help save money spent on the use and maintenance of door products.