Linoleum is a universal floor for flooring. Linoleum is used in both residential and commercial premises. In commercial rooms, linoleum is used more durable. Linoleum used for commercial purposes differs from domestic only thickness. Lining linoleum in household and commercial premises is practically no different. Linoleum rolls before laying must be stored in an upright position. Linoleum should get used to the microclimate of the room, so before laying should be in the room for several days.
The surface for laying linoleum should be carefully prepared. The surface should be even and dry. The surface must be thoroughly cleaned of clogging and dust.
Linoleum can be laid in two ways: with or without glue. If linoleum laying is carried out without glue, then the joints between the sheets of linoleum are nailed by small nails. The distance between the hats should be about 50 cm.
When laying linoleum using glue, it is necessary to make sure that all air comes out when gluing. After gluing, you need to leave the floor for several days to dry. The duration of drying depends on the glue properties. The skirting board is installed only after the glue dries. If more than one linoleum sheet was used in the room, then the seams between them are brewed with liquid, for cold welding of the seams, only after the glue is completely dried.
Linoleum with a pattern has its own styling features. So the second canvas is glued only after a few days, along the edge 15-20 cm wide, adjusting the pattern. The edge should be pressed by the load and remain in this position for 2-3 days. Only then the second canvas is glued finally.
Note: If you are interested in real estate outside of Moscow, we suggest visiting poselok_moscow_river. On this page you will find detailed information about the cottage village “Moscow River”. Real estate in this village will definitely become precisely what you need.
