Bans are very popular structures for any private site. It is important in the process of creating the design to take into account what factors it should have, as well as what doors in it are installed so that they are suitable for those conditions that are set in the rooms.
Especially difficult operating conditions are in the steam room. Doors should be resistant to moisture and temperature changes.
What are the requirements of the doors in the steam room?
Standard interior doors will not be able to cope with the established conditions, since they will be dry out and deformed under the influence of moisture and high temperature.
The doors must meet the following requirements:
excellent thermal insulation parameters that do not allow the heat to leave the steam room to other rooms;
a sealed structure in which there are completely no joints or cracks, as well as other problems that can cause cold bridges;
resistance to high temperature or high humidity, since these factors should not have a negative effect on products;
the door frame is much lower than that of the standard door structure;
To create optimal ventilation of the space, a special gap inside the door leaf is formed.
Doors are installed in accordance with the following safety rules:
The door should open exclusively outward, since if a fire occurs in the room, it will be possible to quickly and quickly leave the dangerous room;
Since door loops and handles are heavily heated, the correct opening of the door prevents the probability of burning these main structural elements;
The canvas itself in the door is created from materials that do not heat up too much in the process of taking the bath, since otherwise it can be easily burned about them;
It is necessary to make a special window in the canvas for the safety of using the steam room for its purpose.
What materials are used to create structures?
Such doors that can be installed in a steam room are created from various materials. The most popular designs are:
Doors made of wood. For their production, rogue boards are used, which after sheathed with panels of the lining. Wooden products can be not only convenient in use and reliable, but also beautiful, since they can be equipped with exquisite and bright artistic carvings applied by their hands. However, the cost of structures is set very high. The most popular wood species for creating a door in the steam room are: linden or pine, aspen or oak.
Glass structures. It is very beautiful and popular, and for steam rooms, products created from tempered glass are necessarily selected. Properly selected glass has high strength and resistance before the influence of moisture. It is completely safe for constant use. Due to the unique production technology, high door resistance is guaranteed before exposure to high temperature. Glass care is light and simple, since it can be easily washed and cleaned of different contaminants.
Combined doors. They are usually produced with a combination of wood with glass. The resulting design has high strength and other positive operational parameters.
How to warm the door to a steam room?
It is important to correctly choose the door structure for the steam room, but even in the case of the right choice, it is best to warm it well. This is guaranteed to obtain ideal conditions for the adoption of water procedures.
Insulation is carried out in the following stages:
Wooden bars are prepared, the thickness of which is 20 mm.;
They are nailed throughout the door leaf, and it is from the outside of the structure, and beyond the edge of the canvas, they should protrude for about 15 mm.;
The resulting frame is extended by high -quality thermal insulation material, and for this, a felt is usually used;
The insulation is invested in the distance that is between the bars;
After insulation, sheets of fiberboard or plywood are packed on the frame.
Thus, the doors installed in the steam room must comply with numerous parameters and requirements. In this case, they will be reliable and durable, as well as stable before many influences. To increase their parameters, additional insulation of structures is allowed.