Under climatic conditions that are present in most of our country, during the construction of houses, you can not do without such a stage of construction work as insulation of the facade. At the same time, it is worth noting that far from every technology for insulation of the facade will be acceptable. In this regard, you should draw your attention to the technology of building wet facades. The specified type of facades shows good operational properties in the climatic conditions of our country, and the construction of this facade will not require you to cost significant material means. Consider the device of the wet facade and its operational characteristics.
The specified type of facade is called wet not due to the fact that liquid materials are used for its device. The name arose due to the fact that the facade structure includes dry construction mixtures that are diluted with water. This facade is able to protect the walls of the house from environmental exposure and prevent heat loss from residential premises through the walls of the house, while condensation and mold are not formed on the walls. In addition, the wet facade will significantly improve the appearance of the building, give it individuality.
The technology of the construction of wet facade
Now consider the technology of building a wet facade. In the beginning, glue is applied to the walls of the house, which includes polymers. Due to the presence of polymers, the glue will not be exposed to moisture in the consequence and will not change its characteristics. After that, the heat -insulating material is glued to the walls. Sheets of polystyrene foam, or mineral wool can be used as heat -insulating materials.
These heat -insulating materials have their advantages and disadvantages, and the choice of a particular material depends only on your personal preferences. Then, a reinforcing mesh is mounted on the heat insulator, on which a layer of plaster is applied. Thus, a facade has a multi -layer structure, and each layer performs its own specific function.
We apply a decorative layer
If you look at what happened during the performance of the above work, you will see that the facade has accepted a completely non -attractive appearance. Therefore, it is necessary to apply a decorative layer on it and there are several decoration options. The cheapest option is to apply decorative plaster to the facade, which is distinguished by a variety of textures and colors.
If you want to get a more presentable appearance of the facade, then the finish can be done using decorative tiles, siding and other materials. But it should be borne in mind that the load on the facade should be minimal, that is, porcelain stoneware in this case is better not to use.