Good soundproofing qualities. Great moisture resistance and ease of assembly. All these qualities are possessed by suspended ceilings Armstrong. When assembling suspended ceilings, special attention is paid to the distribution of the load over the entire area of the structure. The correct load is 3.5 – 6 kg of weight per square meter. Profiles like T15x38, T24x38, are the main and perform the function of supporting profiles, of which the suspended ceilings Armstrong.
Carrying profiles on adjustable springs are attached to the base of the ceiling. The distance between the fixed springs should not exceed 1.2 meters. Specialists recommend that the ceiling consolidate the ceiling in the following order:
– We measure the room and determine the main axes
– Using a measuring roulette and level, we make marks on the walls
– From the central axis of the room we make markings for future lamps and ventilation
– On the walls, along the entire perimeter of the room, we fix the profile of the PU 19×24.The dowel is used for fasteners, and is attached at a distance of 500mm from each other
– With the help of anchors, suspensions to the ceiling are fixed
– fixing the main T-profile 24×38, align the marked plane
– We fix the transverse T-profile 21×32 in the carriage of the main T-profile
– In the shooting of the transverse T-profile 21×32 we fasten the longitudinal T-Profile 24×28
– In the cells that were formed as a result of installation, we lay ceiling slabs. Stoves, laid on the arrows that are located on the back of the plate
– Laying soundproofing, installing lamps and ventilation grilles, is performed during the installation of suspended ceilings Armstrong.
