If the roof of your house has a flat shape, then it can be covered with rubber. Moreover, if all technological features are observed, such a coating will last you a very long time. We start work with cleansing the roof of garbage, dirt and dust. If there are wet areas, then they need to be dried. Next, from the roof, you need to remove all the elements that will interfere with the installation of the coating – drains, pipes, and so on. Now you need to raise rolls with self -adhesive rubber on the roof, which we will use. We cut the rubber in size, while working under the ruler, to obtain a better result. Better leave small allowances – five centimeters on each side. These allowances will help with overlap and adjustment of the material to another part of it. We apply a primer to the roof and wait until it dries
Such work is usually performed by owners of private small houses. If you doubt that you can do it yourself, then better use the services of professionals. And if in a high -rise house it is necessary to install elevators, then highly qualified people will also need to act in such situations. There are three main types of installation of elevators, each of which is familiar to a specialist, so he will advise how it is better to choose from them.
After the primer dries, we begin to glue the rubber to the roof, starting with the sticky of the part. Work without folds and wrinkles, then lay the second sheet. In this case, the seams of the overlap will need to be treated with a roller. The junctions must be treated with a silicone -based sealant.
